How To Get a Broken Key Out of a Car Lock?

How To Get a Broken Key Out of a Car Lock. It can be very frustrating if you’ve ever had a fundamental break-off in a car door lock. You may be asking how to open a car lock with a broken key. While it might seem difficult, there are several methods to get a broken key out of your car lock.

Best techniques for extracting a broken key from a car lock

Use Tweezers

One of the first things you can try to remove a broken key from a car lock is using tweezers. Simply insert the tweezers into the lock and see if you can grab onto the broken key. If you can grab onto the broken key, you may be able to pull it out.

Broken Key Extractor

If tweezers aren’t working, you can try using a broken key extractor. A broken key extractor is a tool that is specifically designed for removing broken keys from locks.

To use a broken key extractor, insert the tool into the lock and turn it clockwise. The tool will grab onto the broken key and allow you to remove it from the lock.

Hacksaw Blade

If you don’t have a broken key extractor, you can try using a hacksaw blade. Insert the hacksaw blade into the lock and try to see through the broken key. Once you’ve cut through the broken key, you should be able to remove it from the lock.

Super Glue

Another method you can try is using super glue. Apply a small amount of super glue to the end of a toothpick or another small object. Then, insert the toothpick into the lock and push it against the broken key. The super glue will grab onto the broken key and allow you to pull it out of the wave.

Tapping the Cylinder

If you have a broken key that is stuck in the cylinder of the lock, you can try tapping the cylinder. Place the barrel of a screwdriver against the broken key and tap it with a hammer. The impact will loosen the broken key and allow you to remove it from the lock.

Probe and Pull

Another method you can try is called “probing and pulling.” Insert a small flathead screwdriver or another thin object into the lock. Then, use the screwdriver to push on the broken key until it pops out of the cylinder. Once the broken key pops out, you should be able to pull it.

Needle Nose Pliers

If you have needle nose pliers, you can try using them to remove the broken key from the lock. Insert the needle nose pliers in the lock and try to grasp the broken key. Once you have a compacted hold on the broken key, you should be able to drag it out.

Align the Cylinders

If your car has multiple locks, you can try aligning the cylinders. Start by inserting a small flathead screwdriver into one of the locks. Then, use the screwdriver to turn the cylinder until it aligns with the broken key. Once the cylinders are aligned, you should be able to remove the broken key from the lock.

Apply oil

If you’re having trouble removing the broken key from the lock, you can try applying oil to the lock. Drop a small amount of oil into the broken key and the cylinder.

Then, insert a small flathead screwdriver into the lock and use it to turn the broken key. The oil will help lubricate the broken key and allow you to remove it from the lock.

Heating the Key

If you have a broken key that is made of metal, you can try heating the key. Use a lighter or a torch to heat the broken key.

Then, try inserting a small flathead screwdriver into the lock and using it to turn the heated broken key. The heat will help loosen the broken key and allow you to remove it from the lock.

Freezing the Key

If you have a broken key that is made of metal, you can also try freezing the key. Place the broken key in a bag of ice for a few minutes.

Then, try inserting a small flathead screwdriver into the lock and using it to turn the frozen key. The cold will help shrink the broken key and allow you to remove it from the lock.

Drilling Out the Lock

If all else fails, you can try drilling out the lock. This method should only be used as a last resort, as it will damage the lock. Use a small drill bit to drill a hole in the center of the broken key. Once you’ve drilled through the broken key, you should be able to remove it from the lock.

Try pulling the key out with a gum eraser

If you have a broken key that is stuck in the lock, you can try using a gum eraser to remove it. Start by inserting the eraser into the lock and pushing it against the broken key.

Then, use your fingers to grip the broken key and pull it out. The gum eraser will help grab onto the broken key and allow you to remove it from the lock.

How To Get a Broken Key Out of a Car Lock – Conclusion

In conclusion, if you have a broken key in your car lock, there are a few things you can try to remove it. If you have needle nose pliers, you can try using them to grab the broken key and pull it out.

If your car has multiple locks, you can try aligning the cylinders so that they’re in line with the broken key. You can also try applying oil to the broken key and cylinder, or heating up or freezing the broken key. If all else fails, you can drill out the lock, but this should only be considered a last resort.